Results 1 to 4 of 4
  1. #1
    Propeller Wizzard meglin's Avatar
    Join Date
    Aug 2015
    Location
    Ukraine
    Posts
    120
    Thanks
    0
    Thanked 4 Times in 4 Posts

    Wheel fairings for aircraft, trikes, gyroplanes

    Wheel fairings for aircraft, trikes, gyroplanes.
    tire size - 400*100 mm (4.00-8), 400*150 mm and others.
    With the keel and without a keel.
    Fairings wheels for Cessna airplanes, RVs, Sportstar.
    Strength higher than the original weight - below.
    Attached Images Attached Images
    Best regards, Vladimir Meglinsky
    My site: http://propeller.simplesite.com/


  2. #2
    Propeller Wizzard meglin's Avatar
    Join Date
    Aug 2015
    Location
    Ukraine
    Posts
    120
    Thanks
    0
    Thanked 4 Times in 4 Posts
    We make wheel fairings on Cessna-172.
    The cost of one set - $550 (fiberglass) - 3 pieces (the two main (6.00*6) and one bow (5.00*5)).
    The cost of one set - $900 (Carbon) - 3 pieces (the two main (6.00*6) and one bow (5.00*5)).
    Weight of fiberglass fairing 1300 g (main), 1000 g (the bow).
    The weight of carbon fiber fairing 1000 g (base), 800 g (bow).
    On the fairing has a hatch to swap wheels and interior partitions.

    Production of wheel fairings on the RV-6.
    The cost of one set of $440 (fiberglass) - 2 pcs (main wheels 5.00*5).
    The cost of one set of $750 (Carbon) - 2 pcs (main wheels 5.00*5).
    Weight of fiberglass fairing 900 g.
    The weight of carbon fiber fairing 700 g.

    On the fairing has a hatch to swap wheels and interior partitions.
    Composition (base) - certified epoxy for aviation name of Epoxy 619 and the structural fabric of the T-10 (14).
    The method of vacuum forming and heat setting.
    They are light and strong, not afraid of blows, falling stones and walked on them.
    Caulking is not used.
    Guaranteed operation 3000 thousands of flight (about 5 years of active use) and post-warranty service.
    Product Data Sheet attached.
    The passport shows all performance characteristics.
    All fairings are covered with soil and are ready for painting.
    Manufacturing - within 15 working days from the date of payment.
    Sending at EMS.
    Sending is about 7-10 business days.
    Attached Images Attached Images
    Last edited by meglin; 12-12-16 at 09:12 AM.
    Best regards, Vladimir Meglinsky
    My site: http://propeller.simplesite.com/


  3. #3
    Propeller Wizzard meglin's Avatar
    Join Date
    Aug 2015
    Location
    Ukraine
    Posts
    120
    Thanks
    0
    Thanked 4 Times in 4 Posts
    I congratulate everyone on the New Year!
    Best regards, Vladimir Meglinsky
    My site: http://propeller.simplesite.com/


  4. #4
    Propeller Wizzard meglin's Avatar
    Join Date
    Aug 2015
    Location
    Ukraine
    Posts
    120
    Thanks
    0
    Thanked 4 Times in 4 Posts
    Production has mastered a new range of wheel fairings. Now we even serve the wheels of the Tundra.
    Best regards, Vladimir Meglinsky
    My site: http://propeller.simplesite.com/


Similar Threads

  1. Seats trikes, gyroplanes and aircraft
    By meglin in forum Aircraft Parts
    Replies: 3
    Last Post: 24-03-19, 09:43 AM
  2. BB Trikes for SSDR
    By Job_CF in forum Gallery
    Replies: 13
    Last Post: 30-11-16, 17:53 PM
  3. Amazing shots of the WAG trikes
    By willjohnh in forum Gallery
    Replies: 0
    Last Post: 18-01-16, 15:49 PM
  4. Wanted Rans S6 leg fairings
    By DanW in forum Rans S6
    Replies: 3
    Last Post: 31-03-13, 18:01 PM
  5. Airbags for Trikes
    By Sam in forum Off Topic Discussion
    Replies: 3
    Last Post: 26-01-12, 21:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •